Cimtek
Grainger
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Length
Inlet
Application
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 2 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
2 Inch Tee Double Outlet Vent Threaded Female NPT
Item No. 155-0500AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Tank Monitoring Cap With Port Hole & Cable Connector 3/8 Inch
Item No. 305XP-2200AC
2 Inch Tank Monitoring Cap With Port Hole & Cable Connector 1/2 Inch
Item No. 305XP-2400AC
Used for fill ports and access to leak detection on fuel storage tanks
2 Inch Tank Monitor Cap & Adapter With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XPA-2200AK
Combination cap and Adapter kit for leak detection systems
2 Inch Tank Monitor Cap & Adapter With 1/2 Inch Port & Cable Connector
Item No. 305XPA-2400AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
2 Inch Nipple Check Valve With 25 Psi Expansion Relief
Item No. 530-0100AV
One way check valve used to prevent backflow
2 Inch Solenoid Valve Viton Seal 120 Volt Explosion Proof
Item No. 710-02001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil
Item No. 710SS-22001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch EVR Clock Gauge With Female Threads And Drop Tube Float
Item No. 818F-0400AGEVR
Used to measure liquid levels in aboveground storage tanks.
2 Inch Ast Overfill Prevention Valve With Part F Adapter 2 Inch Shut-Off Height
Item No. 9095DS-0200AV
Prevents overfilling storage tanks by providing a positive shut-off during a pressurized fill. installs in a 2 inch Female threaded opening at the fill port of a storage tank
2 Inch AST Overfill Prevention Valve With Part A Adapter, 2 Inch Shut-Off Height
Item No. 9095DS-2200AV
Prevents overfilling storage tanks by providing a positive shut-off during a pressurized fill. installs in a 2 inch Female threaded opening at the fill port of a storage tank
2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 0-5 Foot W.C.
Item No. 910-2000AV
Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.
2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 5-10 Foot W.C.
Item No. 910-2100AV
Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.
2 Inch Carb EVR Approved AST Overfill Prevention Valve With 2 Inch Dry Disconnect Adapter x 4 Inch Female NPT
Item No. 9095AA5200AVEVR
Installed at the fill port of an aboveground storage tank
14 Inch Cast Iron Straight Handle Pipe Wrench With 2 Inch Capacity Steel Jaw
Item No. 3LY99
Features serrated jaws, floating hook jaw, non-stick adjustment nut, replaceable hook and heel jaws.
2 Inch Overfill Prevention Valve With Part F Male Threaded Aluminum
Item No. 9095SA-0200AV
9095SA series overfill prevention valve is designed to prevent the overfilling of liquid storage tanks by providing a positive shut-off during a pressurized fill. Direct Fill Installations Installs on tank top by threading onto a 2 Inch Male NPT riser Installs inside 2 inc Morrison model 516 or 518 tank top spill container Remote Fill Installations Valve has 2 inch female NPT inlet threads for installation piping to remote fill point
