Open
Low Profile
Narrow Your Results
Mfr / Trade Name
Caps & Adapters
Valves, Drop Tubes & Vents
Type
Composition
Size
Color
- List View
- Gallery View
Page of 1 |
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
2 Inch NPT Thread-On Aluminum Pressure Vacuum Vent 2-1/2 - 6 Inch Range Water Column Pressure 6 - 10 Inch Range Vacuum
Item No. A0084-038
Is an internal pressure vacuum valve that restricts vaopr escape during product drops.
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
2 Inch O-Ring Seal Pressure Vacuum Vent
Item No. 80230302
Vent rates of 8000 cubic feet per hour and vent at 13.8 in WC of pressure and 0.8 in WC of vacuum.
2 Inch Open Vent Upward Aluminum
Item No. 23-0033
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-3203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
3 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0400AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-2203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
2 Inch Pressure Vacuum Vent Slip On 8 Ounce Pressure 1/2 Ounce Vacuum
Item No. 523V-1150
Factory preset and tested settings
2 Inch Pressure Vacuum Vent Thread On 3 Inch Water Column Pressure 8 Inch Water Column Vacuum
Item No. 523V-2203
Factory preset and tested settings
2 Inch Pressure Vacuum Vent Slip On 3 Inch Water Column Pressure 8 Inch Water Column Vacuum
Item No. 523V-2253
Factory preset and tested settings
3 Inch Updraft Vent Cap
Item No. 354-0300AV
Open vent design used on under ground and above ground tanks
2 Inch Pressure Vacuum Vent Thread On 8 Ounce Pressure 1/2 Ounce Vacuum
Item No. 523V-1100
Factory preset and tested settings
3 Inch Low Profile Orange Vapor Adapter Cap
Item No. A0099-004LP
Designed for use when there is limited space between the top of the adapter and the spill containment lid
2 Inch Thread-On Pressure/Vacuum Vent 3 Inch Wcp-8 Inch Wcv
Item No. 4885
Incorporates 3 separate valves to control over-pressure and vacuum conditions that arise in storage tanks.