Fill-Rite
Jomar
Narrow Your Results
Mfr / Trade Name
Category - Main
DIM Installation Kit & DIM Installed Modules
Replacement Parts & Spare Modules
Sensor
Submersible Pumps, Motors & Leak Detectors
Type
Model Number
- List View
- Gallery View
| Page of 1 |
Adjustable Functional Element For AG Pumps
Item No. 323-002-5
Repair part for Red Jacket submersible turbines
Printer Gear
Item No. 329213-002
Replacement printer gear for TLS-300 and 350 series consoles
Bir Protocol Dim Dispenser Interface Module For Tls-350R Spare Replacement
Item No. 330280-001-SPARE
Refer to POS Application Guide. If using an ANDI controller, a BIR Protocol DIM is used every time.
120 VOlt IQ Control Box
Item No. 880-051-1
Easy to use and easy to install control for manifold pumps
Adjustable Functional Element For Non Ag Pumps
Item No. 323-001-5
Repair part for Red Jacket submersible turbines
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
