Jack Screw Kit
90 Degree Elbow
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Fiberglass
Semi-Rigid
Type
Composition
Size
Tank Diameter
- List View
- Gallery View
| Page of 3 |
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
4 Inch Primary 90 Degree Elbow
Item No. 012040-360-4
UL 971 listed and also available in 2 inch and 3 inch
6 Inch 90 Degree Elbow (2 Piece)
Item No. 012060-360-9
Used for containment of primary piping / fittings
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
4 Inch 2-Piece Secondary Containment 90 Degree Elbow
Item No. 44372005
Proven reliable fiberglass pipe system
4 Inch LCX 2-Piece Secondary Containment 90 Degree Elbow
Item No. 44469201
Proven reliable fiberglass pipe system
Jack Screw Kit For Composite Base
Item No. 61JSK-4410
Allows liquid in the spill containment to drain directly into the drop tube
Jack Screw Kit For Cast Iron Base
Item No. 61JSK-44CB
Allows liquid in the spill containment to drain directly into the drop tube
4 Inch Nickel Plated E85 EVR Approved Fill Swivel Adapter
Item No. 61SALP-MA
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 inch 61SOR Series Dual-Point Non-Vaportight Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-4000
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
4 inch 61SOR Series Dual-Point Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-400C
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
4 Inch Nickel Plated E85 Evr Approved Vapor Recovery Swivel Adapter
Item No. 61VSA-MA
Nickel coated brass construction for durability, consistent swivel torque, and reliable vapor tight sealing
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
4 Inch X 4 Inch Fill Adapter Aluminum Top Seal
Item No. 633T-8075
Threads onto the 4 inch fill pipe of underground storage tanks to mate with top-seal delivery 4 inch elbow
4 Inch Fill Cap Top Seal Low Profile (E85 Approved)
Item No. 634LPC-0400
Designed for tight installations where clearance between top of fill Adapter and spill container cover are limited
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
4 Inch Metal Top-Seal Fill Cap
Item No. 634TT-4000
Metal top seal cap with the same dimensions as the 634TT-7085
6 Inch Secondary Containment 90 Degree Elbow (2 Piece)
Item No. 66352002
Proven reliable fiberglass pipe system
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85