IQ Control Box
3/8 Inch Port
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Replacement Parts
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Type
Composition
Size
- List View
- Gallery View
| Page of 1 |
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-2200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet
Item No. 62M-0375
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
120 VOlt IQ Control Box
Item No. 880-051-1
Easy to use and easy to install control for manifold pumps
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-080
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Thornton Oil 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-156
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Chevron 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-188
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ExxonMobil 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-225
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-226
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Speedway/SuperAmerica 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-248
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Sunoco Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-289
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Fiserv Wells NA TD-351 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-463
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Heartland Small Merchant 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-468
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Valero Fiserv TD-346Â 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-480
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Marathon Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-482
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Shell Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-488
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: BP Fiserv TD-246 Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-491
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: CITGO Heartland Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-492
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Keypad Assembly: Wayne Standard/Blank - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-700
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XP-0200ACEVR
Tank monitor caps are installed on tank monitor riser pipe adapters to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
2 Inch CARB EVR Approved Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-2200AKEVR
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-0200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
