Hose Master
OPW Fueling Components
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Electronic Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Length
Gallon Size
Inlet
Color
Application
- List View
- Gallery View
| Page of 5 |
4 Inch Grey EVR-Approved Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
3 Inch Orange CARB EVR Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Single Channel Liquid-Level Tank Alarm For Aboveground Storage Tank (Ast)
Item No. 144TA-0100
Self powered by a Lithium battery with a 10 year long service life (included)
2 Inch Kamvalok Adapter With Poppet Buna Seal
Item No. 1611AN-0200
Contains an internal spring-loaded valve assembly that automatically closes to prevent fuel spills
2 Inch Viton Kamvalok Adapter
Item No. 1612AN-0200
The 1611AN Series Kamvalok Adapter is installed at the fill pipe and replaces the 633AST
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
2 Inch Horizontal Emergency Shut-Off Valve
Item No. 178S-6130
178S ductile iron construction
1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2150
Factory-adjusted hydrostatic head pressure settings
2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2200
Factory-adjusted hydrostatic head pressure settings
2 Inch Anti-Syphon Valve 10 To 15 Foot Head Pressure
Item No. 199ASV-3200
Factory-adjusted hydrostatic head pressure settings
Ast Mechanical Tank Gauge - Up To 18 Feet
Item No. 200TG-ENG
Designed for reading liquid levels in horizontal or vertical aboveground storage tanks in English foot and inch units
8 Inch Emergency Vent Spring-Loaded Opens At 2-1/2 Psi (Flanged)
Item No. 202F-0600
The OPW 202 Emergency Vent is designed to prevent an aboveground storage tank from becoming over-pressurized by providing full-bore high-capacity venting in the event of a fire or blockage of the OPW 23 113 523V or 623V.
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch Ast Emergency Vent 8 Oz Pressure Male NPT
Item No. 301M-4081
CARB EVR certified Above Ground Storage Tank Phase I Enhanced Vapor Recovery emergency vent system prevents an above ground storage tank from becoming over-pressurized by providing high-capacity venting in the event of a fire or blockage of the vent system
