Tank Monitor Cap & Adapter
Fill Cap
Narrow Your Results
Mfr / Trade Name
Category - Main
Sensor
Caps & Adapters
Accessory
Type
Composition
Size
Tank Opening
Riser Length
Color
- List View
- Gallery View
| Page of 2 |
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
4 Inch Duratuff Toggle-Type Side Seal Cap
Item No. 62TT-7085
Designed to mate with 61AS side seal Adapter
4 Inch Top Seal Flat Top Low Profile Cap
Item No. 731-40
Water and vapor tight can-action handle
2 Inch Male NPT Powder Coated Black Cast Iron Hinged-Style Fill Cap
Item No. 179MCI-0100AC
Cast-iron construction
4 Inch Fill Cap Evr Approved
Item No. 305C-0100-ACEVR
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
4 Inch Evr Approved Vapor Recovery Cap
Item No. 323C-0100ACEVR
EVR approved all aluminum construction and orange powder coating
4 Inch Tank Monitor Cap & Adapter With 1/2 Inch Threaded Porthole & Cable Connector
Item No. 305XPA-1200AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
Replacement 3 Inch Nitrile Gasket For 1711T Vapor Recovery Cap
Item No. H10886M
Replacement gasket for 1711T-7085-EVR cap
4 Inch Evr Approved Tank Monitor Cap & Adapter Kit With 1/2 Inch Connector
Item No. 305XPA-1100AKEVR
Combination cap and Adapter kit for leak detection systems
2 Inch Cast Iron Hinged Style Fill Cap Female Thread - Powder Coated Black
Item No. 179CI-0100AC
Cast-iron construction
2 Inch EVR Approved Tank Monitor Cap and Adapter With 3/8 Inch Threaded Porthole
Item No. 305XPA-2200AKEVR
- Comes with a 3/8 inch cable connector port
4 Inch Evr Approved Tank Monitor Cap/Adapter With 3/8 Inch Port & Cable Connector
Item No. 305XPA-0200AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
Top Seal Fill Cap 4 Inch
Item No. A0097-005
Designed for use on conventional A0030 or coaxial A0089 and A0096 Adapters
3 Inch Low Profile Orange Vapor Adapter Cap
Item No. A0099-004LP
Designed for use when there is limited space between the top of the adapter and the spill containment lid
4 Inch Vapor Adapter Cap
Item No. A0099-002
The cap is made of corrosion resistant orange impregnated material for vapor line ID
All-In-One Fill Swivel Adapter Kit For 5 Gallon PHIL-TITE And EBW Series Below-Grade Spill Containers With CARB EVR Stainless Fill Adapter, 4 Inch Top Seal Cap, And 5 Inch Riser Nipple
Item No. 70541201
The fill swivel adapter helps prevent leaks caused by constant fill delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter.
