Extractor Valve
Drain Valve
Narrow Your Results
Mfr / Trade Name
Valves, Drop Tubes & Vents
Type
Composition
Size
- List View
- Gallery View
Page of 2 |
4 Inch X 2 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4420
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 2 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4422
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 3 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4433
Threads into 4 inch NPT opening on an underground storage tank
Test Plug For 233 Series Extractors
Item No. 233VP-6046
Incorporates an O-ring above the threads (on the plug) to isolate the tank from the vent piping system during tan test
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
Extractor Tee Fitting & 2 Inch Cage 4 Inch X 4 Inch X 2 Inch
Item No. A0079-120
Consists of a cast iron extractor body and an internal bar style cage
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.