Underground Storage Tank Equipment
Dispenser Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Length
Gallon Size
- List View
- Gallery View
Page of 2 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
4 Inch X 13 Foot Pvc Well Screen
Item No. 61SPVC-4000
Slotted PVC pipe designed for monitoring well applications
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
Fiberglass Dispenser Sump 11 Inch X 23 Inch
Item No. DSF-1123
Engineered with thick side walls to withstand backfill and high water table forces
Fiberglass Dispenser Sump Double Wall 40 Inch X 21 Inch
Item No. FDS-4021-DW
Allows the supply piping to enter and/or exit out of the sidewall of the containment sump at very low elevation.
4 Inch X 13 Foot Schedule 40 PVC UST Monitoring Well Slotted 0.010 Screen With Bottom Plug
Item No. P4040130010U
Precision machined from high quality Schedule 40 PVC pipe meeting all applicable standards.
Fiberglass Transition Sump With Fiberglass Top - 39 Inches High
Item No. PSTF-4630
Large injection-molded FRP containment chambers are stackable for convenient shipping and storage
6 Inch X 13 Foot Schedule 40 PVC UST Monitoring Well Slotted 0.020 Screen With Bottom Plug (P4060130020U)
Item No. PVCUST6
Precision machined from high quality Schedule 40 PVC pipe meeting all applicable standards.
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required