Underground Storage Tank Equipment
Dispenser Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Manholes & Spill Containers
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Type
Composition
Size
Riser Length
Fuel Type
Length
Horse Power
Inlet
Application
- List View
- Gallery View
Page of 2 |
Bare Automatic Shut-Off Bulk Fueling Nozzle With 1-1/2 Inlet Aluminum Body Stainless Main Stem Replaceable Spout And 2-Position Hold-Open Device. NSN 4930-01-290-0756.
Item No. 1290-0050
For heavy-duty high-flow truck bus and home fuel oil delivery.
Taller Packer Discharge Seal (Blue Mark)
Item No. 144-193-1
2 inch diameter seal is 1/32 inch taller than the standard seal
295 Series AVGAS Overwing Aircraft Nozzle With 1 Inch Inlet Aluminum Body 1 Inch Replaceable Short Spout Dust Cap Ground Wire Vinyl-Coated Lever Built-In Swivel And Red Color-Coded Composite Lever Guard
Item No. 295SA-0135
Lightweight easy to maneuver aluminum body. Red composite lever guard denotes AVGAS.
295 Series Jet A Overwing Aircraft Nozzle With 1-1/2 Inch Inlet Aluminum Body 2-3/8 Inch Replaceable Long Spout Dust Cap Ground Wire Vinyl-Coated Lever Built-In Swivel Check Valve And Black Color-Coded Composite Lever Guard
Item No. 295SACJ-0200
Lightweight easy to maneuver aluminum body. Black composite lever guard denotes Jet A fuel.
12 Inch Replacement Neoprene Manhole Body Ring Gasket Seal For 104A-1200WT, 104A-1219WT, 104AOW-1200, And 104AOW-1219
Item No. H12873M
Replacement gasket only for the 12 inch OPW 104A Series cast iron manhole.
3/4 hp Fixed Speed 57 Inch to 86 Inch Variable Length Submersible Turbine Pump Without Riser (STP75-VL1-00)
Item No. 402006901
Variable length model (VL1) extends from 55 inches to 83 inches and includes a standard model check valve (40 psi relief / 35 psi reset) for MLD and TS-LS300)
3/4 hp Fixed Speed 88 Inch to 149 Inch Variable Length Submersible Turbine Pump Without Riser (STP75-VL2-00)
Item No. 402009901
Variable length model (VL2) extends from 88 inches to 149 inches and includes a standard model check valve (40 psi relief / 35 psi reset)
1-1/2 hp Fixed Speed 91 Inch-152 Inch Variable Length Submersible Turbine Pump Without Riser (402010901)
Item No. STP150-VL2
Variable length model (VL2) extends from 91 inches up to 152 inches fitting 94% of all known installations includes standard model check valve (40 psi pressure relief and 35 psi reset)
1-1/2 hp Variable Length 91 Inch-152 Inch Variable Length Submersible Pump With 19 Inch Riser (STP150-VL2-19)
Item No. 402010919
Variable length model (VL2) extends from 91 inches up to 152 inches fitting 94% of all known installations includes standard model check valve (40 psi pressure relief and 35 psi reset)
3/4 hp Fixed Speed 88 Inch-149 Inch Variable Length Submersible Turbine Pump With Model R Check Valve Without Riser (STPR75-VL2-00)
Item No. 402066901
Factory installed model R check valve (24 psi relief / 22 psi reset) for Veeder Root pressurized line leak detection variable length pump extends from 88 inches up to 149 inches
2 HP Fixed Speed 94 Inch to 154 Inch Variable Length Submersible Turbine Pump With Magshell Without Riser (STPM200-VL2-00)
Item No. 402520901
2 hp turbines fuel cars faster during peak business hours due to the higher pump performance
2 Hp Fixed Speed Submersible Turbine Pump With Model R Check Valve Without Riser (STPR200-VL2-00)
Item No. 402636901
2 hp high pressure fixed speed variable length (94 to 155 inches) with MagShell motor
2 hp Fixed Speed 94 Inch to 154 Inch Variable Length Submersible Turbine Pump Non-Magshell Without Riser (STP200-VL2-00)
Item No. 402639901
One pump can provide good flow rate for up to 8-10 nozzles