Dispenser Equipment
Franklin Electric
Narrow Your Results
Mfr / Trade Name
Category - Main
Sensor
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Bury Depth
Riser Length
Length
Gallon Size
Horse Power
Application
- List View
- Gallery View
| Page of 2 |
Defender Series CARB Approved Overfill Prevention Valve With 5 Foot Top Drop Tube And 10 Foot Bottom Drop Tube
Item No. 708691902
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
5 Gallon Cast Iron Grade Level Spill Container With Drain And Black FRC Raintight Cover
Item No. 70547001BLK
Threaded Base
4 Inch NPT Tank Fitting Adapter
Item No. TFA-400-II
High quality and cost effective way to mount tank sumps to a standard 4 inch NPT opening
2 HP Variable Speed 90 Inch-151 Inch Variable Length Submersible Turbine Pump Non-Magshell Without Riser (STPVS2-VL2-00)
Item No. 400834901
Variable length adjusts from 90 inches to 151 inches
3/4 hp Fixed Speed 57 Inch to 86 Inch Variable Length Submersible Turbine Pump Without Riser (STP75-VL1-00)
Item No. 402006901
Variable length model (VL1) extends from 55 inches to 83 inches and includes a standard model check valve (40 psi relief / 35 psi reset) for MLD and TS-LS300)
3/4 hp Fixed Speed 88 Inch to 149 Inch Variable Length Submersible Turbine Pump Without Riser (STP75-VL2-00)
Item No. 402009901
Variable length model (VL2) extends from 88 inches to 149 inches and includes a standard model check valve (40 psi relief / 35 psi reset)
