Underground Storage Tank Equipment
Dispenser Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Caps & Adapters
Valves, Drop Tubes & Vents
Type
Composition
Size
Color
- List View
- Gallery View
Page of 1 |
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
2 Inch Pressure Relief Nipple Check Valve Bronze Viton Seats
Item No. 212VPR-20-3650
Mounted in fuel lines at the submersible pump to hold the prime and prevent premature tripping of mechanical leak detectors
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
4 Inch Tank Monitoring Cap/Adapter Combination With 3/8 Inch Hole
Item No. 305XPA-0100AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
2 Inch Tank Monitor Cap & Adapter With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XPA-2200AK
Combination cap and Adapter kit for leak detection systems
2 Inch Nipple Check Valve With 25 Psi Expansion Relief
Item No. 530-0100AV
One way check valve used to prevent backflow
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet
Item No. 62M-0375
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
Coaxial Reconnectable Breakaway Vapor Valve Carb Evr Certified
Item No. 66CLP-5100
California Air Resource Board certified executive order VR-203-N and VR-204-N
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
Black EVR Balance Nozzle Scuff Guard
Item No. VST-SGNB-BK
Used on VST-EVR-NB-BK and VST-EVR-NB-BKR
Balance Vapor Recovery Safe-T-Break Reconnectable Breakaway With Black 3990 Scuff Guard
Item No. 3360VR
Instant-closing dual check valve design stops fuel in both directions.
Nozzle Balance Evr Phase Ii New Unleaded - Black
Item No. A4005EVR-052
Nitrile and Viton seals Buna-N boot face and a no seal no flow insertion interlock mechanism create a tight vapor seal for proper balance phase II vapor recovery
4 Inch EVR Approved Tank Monitor Cap With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XP-0200ACEVR
2 Inch EVR Approved Tank Monitor Cap and Adapter With 3/8 Inch Threaded Porthole
Item No. 305XPA-2200AKEVR
- Comes with a 3/8 inch cable connector port
4 Inch Evr Approved Tank Monitor Cap/Adapter With 3/8 Inch Port & Cable Connector
Item No. 305XPA-0200AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
Rebuilt Black Unleaded Long Spout Balance Nozzle
Item No. A4005-004
Core Charge Incurred At Check Out Developed to be user friendly and utilizes the most up-to-date vapor recovery technology