Underground Storage Tank Equipment
Dispenser Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Type
Composition
Riser Length
Length
Horse Power
Application
- List View
- Gallery View
Page of 2 |
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector
Item No. 305XP-1200ACEVR
Used for fill ports and access to leak detection on fuel storage tanks
4 Inch Evr Approved Tank Monitoring Cap/Adapter Combination With 1/2 Inch Hole
Item No. 305XPA-1100AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
4 Inch Nickel Plated E85 EVR Approved Fill Swivel Adapter
Item No. 61SALP-MA
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 Inch Nickel Plated E85 Evr Approved Vapor Recovery Swivel Adapter
Item No. 61VSA-MA
Nickel coated brass construction for durability, consistent swivel torque, and reliable vapor tight sealing
4 Inch Aluminum Tank Monitor Cap And Adapter 1/2 Inch Grommet
Item No. 62M-0500
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 1/2 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
4 Inch X 4 Inch Fill Adapter Aluminum Top Seal
Item No. 633T-8075
Threads onto the 4 inch fill pipe of underground storage tanks to mate with top-seal delivery 4 inch elbow
4 Inch Fill Cap Top Seal Low Profile (E85 Approved)
Item No. 634LPC-0400
Designed for tight installations where clearance between top of fill Adapter and spill container cover are limited
4 Inch Metal Top-Seal Fill Cap
Item No. 634TT-4000
Metal top seal cap with the same dimensions as the 634TT-7085
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
4 Inch Low Profile Grey Fill Adapter Cap
Item No. A0097-004LP
Designed for use when there is limited space between the top of the adapter and the spill containment lid
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch X 4 Inch Fill Adapter Bronze Top Seal
Item No. 633T-8076
Threads onto the 4 inch fill pipe of underground storage tanks to mate with top-seal delivery 4 inch elbows
4 Inch Top Seal Flat Top Low Profile Cap
Item No. 731-40
Water and vapor tight can-action handle
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
3/4 HP Fixed-Speed 102 Inch To 162 Inch Quick-Set Adjustable-Length Submersible Turbine Pump With PLLD-Ready Check Valve Without Riser (P75U1 RJ2)
Item No. 410140-002-LESSRISER
The Red Jacket Submersible Turbine Pump (TRJ STP) is designed to optimize fuel flow and dispensing from the storage tank, through the piping, and into the vehicle. The advanced packer manifold is designed for ease of installation and service.