Dispenser Equipment
C-Store
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Dispenser Replacement Parts
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Island Forms, Pump Guards & Bollards
Type
Composition
Size
Fuel Type
Length
Inlet
Color
- List View
- Gallery View
Page of 4 |
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
1 Inch BSPP x M34 DEF Stainless Steel Reconnectable Breakaway/Swivel Adapter
Item No. 21GU-SSB
- Note: 21GU-SSB replaced both the 21GU-SSS and the 21GU-SFH.
4 Inch Tank Monitoring Cap/Adapter Combination With 3/8 Inch Hole
Item No. 305XPA-0100AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
4 Inch Evr Approved Tank Monitoring Cap/Adapter Combination With 1/2 Inch Hole
Item No. 305XPA-1100AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
2 Inch Tank Monitor Cap & Adapter With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XPA-2200AK
Combination cap and Adapter kit for leak detection systems
2 Inch Tank Monitor Cap & Adapter With 1/2 Inch Port & Cable Connector
Item No. 305XPA-2400AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
3 Foot Wide x 5 Foot Long x 13 Inch Tall Stainless Steel Straight Island Form With 6 Inch Radius Ends
Item No. 6013SS-SFR6W3L5
Island forms/curbing protect gasoline dispensers electronic equipment kiosks bank teller ATM and other equipment while streamlining traffic flows.
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
Emergency Shear Valve 1-1/2 Inch Double Poppet Female Stainless Steel
Item No. A0060-023S
Stainless Steel body and top for E85/DEF/ Ultra Low Sulfur Diesel
2 Inch Stainless Steel QuickClamp
Item No. ACQCLAMP0200
FireShield QuickClamp assemblies offer installers the ability to fasten one or both ends of a connector within a piping system with minimal use of tools
2 Inch QuickClamp Viton Seal Gasket
Item No. ACQSEAL0200
FireShield QuickClamp assemblies offer installers the ability to fasten one or both ends of a connector within a piping system with minimal use of tools
1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends
Item No. FF15X18EZMXEZM
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
3 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 3 Inch Nickel-Plated Steel Non-Hex Male x 3 Inch Stainless Steel EZ-FIT Hex Female Ends
Item No. FF30X18MXEZF
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
2 Inch x 12 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS120200
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 1-1/2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS180200
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 2 Inch Hex Female Stainless Steel Ends
Item No. FSMF180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 1-1/2 Inch Male Swivel Stainless Steel Ends
Item No. FSMS180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.