Hose Master
Commercial Zone
Narrow Your Results
Mfr / Trade Name
Category - Main
Containment Sumps, Monitoring Wells & Flex Connectors
Accessory
Enviromental & Safety
Receptacles
Windshield
Fire Safety
Lighting
Type
Composition
Size
Length
Gallon Size
Inlet
Color
- List View
- Gallery View
| Page of 3 |
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
28 Gallon Square Waste Container With Wndshield Service Center (Gray)
Item No. 755103
Molded from high density polyethylene wont rust dent or chip
2 Inch Stainless Steel QuickClamp
Item No. ACQCLAMP0200
FireShield QuickClamp assemblies offer installers the ability to fasten one or both ends of a connector within a piping system with minimal use of tools
2 Inch QuickClamp Viton Seal Gasket
Item No. ACQSEAL0200
FireShield QuickClamp assemblies offer installers the ability to fasten one or both ends of a connector within a piping system with minimal use of tools
2 Inch x 12 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS120200
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 1-1/2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS180200
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 2 Inch Hex Female Stainless Steel Ends
Item No. FSMF180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 1-1/2 Inch Male Swivel Stainless Steel Ends
Item No. FSMS180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
1 Inch X 10 Inch VSTaflex Series Wirebraid Curb Pump Hose Male Rigid X Male Swivel End
Item No. V10CP-010-MRMS
High grade Nitrile tube with Wirebraid reinforcment.
6 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Venturi And Anti-Stretch Safety Cable
Item No. VDVP-EVR-072
ENVIRO-LOC EVR Platinum Balance Hose has a patented, variable design venturi (VDV) that allows for highest flow rates and best results in reducing flow collect ISD alarms. This uniquely designed hose uses an Anti-Stretch cable to reduce recoil during a drive off and eliminate the hose stretch putting the end pull diretctly on the breakaway.
10.1 Ounce Tube Gray Vulkem 116 Polyurethane Sealant
Item No. VGR
One-part moisture curing, gun-grade General-purpose polyurethane sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
4 Foot Ultra Vac Isp Series Vapor Assist Hose
Item No. VST-ISP-048-SS
Designed for Assist type systems where maximum flow rate and efficiency are required
8 Foot Ultra Vac Isp Series Vapor Assist Hose
Item No. VST-ISP-096-SS
Designed for Assist type systems where maximum flow rate and efficiency are required
8-1/2 Foot Ultra Vac Isp Series Vapor Assist Hose
Item No. VST-ISP-102-SS
Designed for Assist type systems where maximum flow rate and efficiency are required
Upper Band Clamp Used On G2 VST-EVR-NB-BK-2 and VST-EVR-NB-BKR-2
Item No. VST-UBC-300
Used on VST-EVR-NB-BK-2 and VST-EVR-NB-BKR-2, also used on VST-EVR-NB-BK-1 & VST-EVR-NB-BKR-1 nozzles
