Emco Wheaton Retail
Cimtek
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Dispenser Maintenance
Dispenser Replacement Parts
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Accessory
Decals
Thread Sealant
Type
Composition
Size
Skirt Length
Tank Diameter
Bury Depth
Micron Size
Fuel Type
Length
Gallon Size
Inlet
Color
Application
- List View
- Gallery View
30 Micron Replacement Filter Element (For Viking 1 1F 2 2F 3F And 4F)
Item No. E1300-30
30 micron cellulose media element only for particulate removal in gasoline ethanol blends up to E15 biodiesel blends up to B100 diesel fuel ultra-low sulfur diesel and fuel oils
PCI-5 Injected Hybrid Chip/Mag Secure Card Reader Service Kit - See Additional Specifications Below
Item No. W2893895-002
Note WU018887-0001 Cable assembly required if replacing W2893895-001 with W2893895-002 card reader.
Lead Seal With 18 Inch Wire
Item No. BP-1468-18
Lightweight lead for easy crimping / marking
Cast Iron Filter Adapter - 3/4 Inch NPT Inlet And Outlet (200H-3/4)
Item No. 50003
Cast-iron construction
10 Micron Cellulose Particulate Removal Spin-On Petroleum Dispenser Filter 1-3/8 Inch-12 Thread (70005)
Item No. 250A-10
Removes particulate in Gasoline and Ethanol blends up to 25% Methanol blends up to 15% Diesel and ULSD.
30 Micron Hydrosorb Particulate Removal And Water Detection Extended Length Spin-On Petroleum Dispenser Filter 1-1/2 Inch-16 Thread - 1 Inch Flow (70043)
Item No. 475HS-30
Removes particulate and detects free or emulsified water in Gasoline Diesel and ULSD. Does not detect Phase Separation.
30 Micron Hydrosorb Particulate Removal And Water Detection Spin-On Petroleum Dispenser Filter 1 Inch-12 Thread - 3/4 Inch Flow (70064)
Item No. 300HS-30
Removes particulate and detects free or emulsified water in Gasoline Diesel and ULSD. Does not detect Phase Separation.
10 Micron Hydrosorb Type 2 Centurion I/II/III/IV Replacement Filter Element
Item No. EHS-10
Ten micron Hydrosorb media filter element for water detection and particulate removal
Rebuilt Black Unleaded Long Spout Balance Nozzle
Item No. A4005-004
Core Charge Incurred At Check Out Developed to be user friendly and utilizes the most up-to-date vapor recovery technology
Pull/Push Drain Assembly Slimline Fatboy A1003/A1004
Item No. 493508K
Pull / push drain assembly
CARB EVR Stainless Steel Fill Riser Seal
Item No. 494096
Provides threaded pressure to seal the drop tube to the top of the fill riser
3/4 Inch Filter Test Cap For 200E 250E 260 And 300 Series Cim-Tek Filters (50001)
Item No. 200C
Cast iron cap off for 1 inch - 12 UNF nose outside thread adapters
Aluminum Filter Adapter 1-1/2 Inch NPT Single Inlet And Outlet
Item No. 50163
1-1/2 inch NPT inlet/outlet ports and 1-1/2 inch - 16 UNF nose outside thread connection
4 Inch Brass Swivel Fill Adapter 4 Inch Female Npsm X 4 Inch Cam And Groove
Item No. A0030-124S
Prevents accidental loosening of the adapter from the fill pipe
Top Seal Fill Cap 4 Inch
Item No. A0097-005
Designed for use on conventional A0030 or coaxial A0089 and A0096 Adapters
3 Inch Low Profile Orange Vapor Adapter Cap
Item No. A0099-004LP
Designed for use when there is limited space between the top of the adapter and the spill containment lid
4 Inch Brass Vapor Adapter Swivel 4 Inch Female Npsm X 4 Inch Cam And Groove
Item No. A0076-124S
Prevents accidental loosening of the adapter from the vapor pipe
4 Inch Vapor Adapter Cap
Item No. A0099-002
The cap is made of corrosion resistant orange impregnated material for vapor line ID
