Morrison Brothers
Card Tech International
Narrow Your Results
Mfr / Trade Name
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Type
Composition
Size
Skirt Length
- List View
- Gallery View
| Page of 1 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
38 Inch Manhole Cover Only With Handle & Pry Plate
Item No. 318L-3812ACC
High strength elastic protective coating, 3X stronger than standard truck bed liner Strong surface adhesion characterstics won't peel or separate Slip resistant surface
44 Inch Replacement Lay-In Manhole Cover Only With Handle And Pry Plate
Item No. 318L-4412ACC
High elastic protective coating Exceptional barrier against moisture and chemicals Strong surface adjesion characteristics Slip resistant surface
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
38 Inch X 10 Inch Lightweight Manhole With Gasket Bolt Down Cover - Black
Item No. 418L-3800AMC
12 inch overall height with a 10 inch skirt (36-11/16 inch skirt id minimum id 34-13/16 inch)