Underground Storage Tank Equipment
C-Store
Narrow Your Results
Mfr / Trade Name
Category - Main
Carbon Canister Vapor Polisher
Hanging Hardware
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Accessory
Enviromental & Safety
Intercoms
Type
Composition
Size
Skirt Length
Tank Diameter
Tank Opening
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Inlet
Color
Application
- List View
- Gallery View
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
Sci Upper Relay Board
Item No. 225005930
Used in STP-SC and STP-SCI single phase smart controllers
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch X 2 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4420
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 2 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4422
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 3 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4433
Threads into 4 inch NPT opening on an underground storage tank
Test Plug For 233 Series Extractors
Item No. 233VP-6046
Incorporates an O-ring above the threads (on the plug) to isolate the tank from the vent piping system during tan test
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
Tsm-4736 Sump Lid Replacement 33 Inch Diameter
Item No. 26003608
High-density polyethylene, gasketed snap-on lid
4 Inch Sanitary Tank Hatch
Item No. 269-0085
Sanitary tank hatch threads onto the fill pipe of an underground sanitary waste disposal tank
26 Inch Watertight Access Cover With Gasket And Locking Ring (C700236)
Item No. 26INCHCOMPLETE
1-1/2 Inch Female NPT x 1 Inch Shorty Offset Adapter
Item No. 303-1510
Compensates for misalignment of dispenser suction stub and dispenser boxes.
1-1/2 Inch Female NPT x 1-1/2 Inch Shorty Offset Adapter
Item No. 303-1515
Compensates for misalignment of dispenser suction stub and dispenser boxes.
1-1/2 Inch Female NPT x 2 Inch Shorty Offset Adapter
Item No. 303-1520
Compensates for misalignment of dispenser suction stub and dispenser boxes.
1-1/2 Inch Female NPT x 2-1/2 Inch Shorty Offset Adapter
Item No. 303-1525
Compensates for misalignment of dispenser suction stub and dispenser boxes.
