Underground Storage Tank Equipment
C-Store
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Gallon Size
Color
- List View
- Gallery View
| Page of 2 |
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Duratuff Toggle-Type Side Seal Cap
Item No. 62TT-7085
Designed to mate with 61AS side seal Adapter
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Swivel Fill Adapter 4 Inch Female Npsm X 4 Inch Cam And Groove
Item No. A0030-124S
Prevents accidental loosening of the adapter from the fill pipe
