Petroleum Containment
C N I
Narrow Your Results
Mfr / Trade Name
Category - Main
Replacement Parts & Spare Modules
Dispenser Replacement Parts
Manholes & Spill Containers
Containment Sumps, Monitoring Wells & Flex Connectors
Fiberglass
Type
Composition
Size
Skirt Length
- List View
- Gallery View
| Page of 2 |
TMS2000/TMS3000 Printer Cartridge Ribbon 5 Pack
Item No. 183501-1-5
Extended life 750,000 characters
1 Gallon Epoxy Bonding Kit
Item No. E154CM
Gel Time 10 minutes at 65 Degrees F 10 minutes at 95 Degrees F Cure Time 2 Hours at 65 Degrees F 45 Minutes at 95 Degrees F
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 1 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-C1
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-C8
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 1 Inch PVC Coated Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-K1
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3/4 Inch PVC Coated Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-K8
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 2 Inch LCX Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-L2
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3 Inch LCX Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-L3
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 4 Inch LCX Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-L4
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 2 Inch RTII Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-R2
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3 Inch RTII Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-R3
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 1 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1F-C1
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1F-C8
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 2 Inch LCX Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1F-L2
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Fiberglass Entry Fitting With Stainless Band Clamp For 3 Inch LCX Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1F-L3
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1R-C8
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Oversize Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-2F-C8
The Oversized Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Oversized model eliminates need to pair the SRB with a BSO fitting. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings