Cimtek
C N I
Narrow Your Results
Mfr / Trade Name
Category - Main
DIM Installation Kit & DIM Installed Modules
Pressurized Line Leak Detection
Sensor
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Type
Composition
Size
- List View
- Gallery View
| Page of 1 |
20 Foot Plug And Lead Harness
Item No. 144-091-5
Isolates and protects individual dispensers from wiring shorts or phasing issues
20 Foot Plug And Lead Harness Standard And Quantum AG
Item No. 144-162-5
Isolates and protects individual dispensers from wiring shorts or phasing issues
Adjustable Functional Element For AG Pumps
Item No. 323-002-5
Repair part for Red Jacket submersible turbines
Bir Protocol Dim Dispenser Interface Module For Tls-350R Spare Replacement
Item No. 330280-001-SPARE
Refer to POS Application Guide. If using an ANDI controller, a BIR Protocol DIM is used every time.
Adjustable Functional Element For Non Ag Pumps
Item No. 323-001-5
Repair part for Red Jacket submersible turbines
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
Pressurized Line Leak Detector With Swift Check Valve
Item No. 848480-003
Pressurized Line Leak Detection (PLLD) provides automatic 3.0 GPH hourly line testing
