Brass
Brass Adapter Aluminum Cap
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Accessory
Decals
Type
Composition
Size
Gallon Size
Color
- List View
- Gallery View
| Page of 3 |
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
2 Inch Gauge Stick Port Cap & Adapter- Brass Body Aluminum Cap
Item No. 178GSP-0100AC
Designed to identify and secure a tank opening dedicated to gauging the product with a gauge stick
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
4 Inch Metal Top-Seal Fill Cap
Item No. 634TT-4000
Metal top seal cap with the same dimensions as the 634TT-7085
