Flexible
BIR Protocal
Narrow Your Results
Mfr / Trade Name
Category - Main
DIM Installation Kit & DIM Installed Modules
Sensor
Flexible Piping
Type
Size
- List View
- Gallery View
| Page of 1 |
Bir Protocol Dim Dispenser Interface Module For Tls-350R Spare Replacement
Item No. 330280-001-SPARE
Refer to POS Application Guide. If using an ANDI controller, a BIR Protocol DIM is used every time.
1-1/2 Inch Entry Boot Fitting For FlexWorks Doublewall Piping
Item No. EBF-0150
For 1.5 inch DW FlexWorks pipe
2 Inch Entry Boot Fitting For Double Wall Flexworks Or Lcx
Item No. EBF-0200
For 2 inch DW FlexWorks pipe or 2 inch LCX
2 Inch Entry Boot Fitting For 2 Inch Rigid Pipe
Item No. EBF-0200F
Watertight pipe and conduit entries
3 Inch Entry Boot Fitting For 3 Inch Double Wall Flexworks Or Rigid Pipe
Item No. EBF-0300
For 3 inch DW FlexWorks pipe 3 inch rigid pipe or 3 inch LCX/MCX pipe
4 Inch Entry Boot Fitting For 4 Inch Rigid Pipe And Axp Pipe
Item No. EBF-0400
Watertight pipe and conduit entries
Flexible Entry Boot For 3/4 Inch Electrical Conduit
Item No. FEB-050-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
Flexible Entry Boot For 1 Inch Electrical Conduit
Item No. FEB-075-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-1/2 Inch Flexible Entry Boot For Xp-150-D
Item No. FEB-150-D
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Flexible Entry Boot For Xp-175-Sc & 2 Inch Single Wall Fiberglass
Item No. FEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
2 Inch Flexible Entry Boot For Xp-200-D
Item No. FEB-200-D
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
2 Inch Flexible Entry Boot For Xp-200-Sc
Item No. FEB-200-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
Flexible Entry Boot For R-300-D & 3 Inch Single Wall Fiberglass
Item No. FEB-300-R
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
Flexible Entry Boot For R-400-D & 4 Inch Single Wall Fiberglass
Item No. FEB-400-R
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1/2 Inch 3/4 Inch 1 Inch Conduit Entry Boot
Item No. EBF-0751
Can be used on 1 inch 3/4 inch or 1/2 inch conduit
12 Inch Magnetostrictive Dual-Float Discriminating Level Indicating Containment Sump Sensor With 10 Foot Cable
Item No. 857080-111
The Veeder Root Mag Sump Sensor quickly and accurately detects the presence and the amount of water and/or fuel in the containment sump or dispenser pan. Using proven magnetostrictive technology to detect hydrocarbons or water, the Mag Sump Sensor produces fast reaction and recovery times, which eliminates costly and unwarranted service calls and sensor replacements. Features Detect and pinpoint fluid type in containment areas to allow for smart dispatching Increase site uptime in locations where shutdown is not required if only water is detected Single module for two- and three-wire sensors provides flexibility for users to monitor multiple sensor types High-grade polymer housing provides enhanced corrosion resistance and fuel compatibility Robust and rugged screw-in connector allows simplified installation and easy inspection Alarm notification upon presence of liquid in the containment area and/or dispenser pan Alarm conditions indicated by audible alarm with displayed and printed message on the console Record of past alarms available as part of the Alarm History Report with the TLS-450PLUS and TLS4 Series consoles
Flexible Entry Boot For 3/4 Inch And 1 Inch Electrical Conduit
Item No. FEB-075-D
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-1/2 Inch Flexible Entry Boot For Xp-150-Sc
Item No. FEB-150-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
