Coupling
Assembled Set
Narrow Your Results
Mfr / Trade Name
Category - Main
Sensor
Submersible Pumps, Motors & Leak Detectors
Fiberglass
Windshield
Type
Composition
Size
Riser Length
Length
Horse Power
Application
- List View
- Gallery View
| Page of 2 |
8 Inch Squeegee Head With 15 Inch Black Plastic Handle
Item No. WS1524U
8 inch squeegee head
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
10 Inch Squeegee Head 20 Inch Red Wood Handle
Item No. 10NY-24A
10 inch sponge squeegee head
Non-Discriminating Piping Sump Sensor With 12 Foot Cable
Item No. 794380-208
Used On TLS-350 and TLS-450
2 Inch Primary Sleeve Coupling (22850707)
Item No. 012020-101-8
UL971 listed and also available in 3 inch and 4 inch
3 Inch 2-Piece Secondary Containment Coupling
Item No. 012030-101-3
UL971 listed and also available in 4 inch and 6 inch
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
Single Float Non-Discriminating Stand Alone Sensor With Dispenser Control Interface
Item No. 847970-001
Connects directly to the dispenser wiring, no console required. Mounting brackets are required 330020-012. CUL Listed.
Single Float Non-Discriminating Stand Alone Sensor With Dispenser Control Interface
Item No. 847990-001
Connects directly to the dispenser wiring, no console required. Mounting brackets are required 330020-012. UL Listed.
3 Inch Primary Sleeve Coupling (33850707)
Item No. 012030-101-8
UL971 listed and also available in 2 inch and 4 inch
4 Inch 2-Piece Secondary Containment Coupling
Item No. 012040-101-3
UL971 listed and also available in 3 inch and 6 inch
4 Inch Primary Sleeve Coupling
Item No. 012040-101-4
UL971 listed and also available in 2 inch and 3 inch
2 Inch Lcx Containment Coupling (2 Piece)
Item No. 22469204
Installs in one half the time of conventional fiberglass pipe
3 Inch 2-Piece Secondary Containment Coupling
Item No. 33370703
Proven reliable fiberglass pipe system
3 Inch Lcx Containment Coupling (2 Piece)
Item No. 33469204
Installs in one half the time of conventional fiberglass pipe
4 Inch 2-Piece Secondary Containment Coupling
Item No. 44370703
Proven reliable fiberglass pipe system
4 Inch LCX 2-Piece Secondary Containment Coupling
Item No. 44469204
Proven reliable fiberglass pipe system
6 Inch Coupling Secondary Fitting (2 Piece)
Item No. 012060-101-9
Used for containment of primary piping / fittings
