Underground Storage Tank Equipment
Ancillary Station Items
Narrow Your Results
Mfr / Trade Name
Valves, Drop Tubes & Vents
Composition
Category - Main
Type
Length
Size
- List View
- Gallery View
| Page of 1 |
2 Inch Diffuser - Slip-On Aluminum
Item No. 539AS-0200AD
Designed for installation at the bottom end of a drop tube to reduce turbulence and vapor loss during the filling operation
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
4 Inch X 15 Foot Straight Drop Tube
Item No. 61T-7368
Installed in the fill riser pipe to an underground storage tank
4 Inch X 13 Foot Coaxial Fill Vapor Recovery Drop Tube
Item No. 61TC-7270
The 61TC coaxial drop tube replaces the 61T conventional drop tube when Stage I vapor recovery is required and a vapor recovery riser pipe is not available on the tank or would require excavation to the top of the tank
4 Inch X 16 Foot Coaxial Fill Vapor Recovery Drop Tube
Item No. 61TC-7272
The 61TC coaxial drop tube replaces the 61T conventional drop tube when Stage I vapor recovery is required and a vapor recovery riser pipe is not available on the tank or would require excavation to the top of the tank
4 Inch X 13 Foot Poppeted Coaxial Fill Drop Tube
Item No. 61TCP-3800
Poppeted coaxial fill drop tube is similar to the 61TC but is spring-loaded
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
4 Inch X 12 Foot Heavy Duty Drop Tube (2-Pack)
Item No. 78220412-2
Heavy wall model for increased durability
1-1/2 Inch And 2 Inch Extractor Wrench Tool
Item No. 89-0044
The OPW 89 Extractor Wrench is designed to install or remove OPW 53VML and 30MV Ball Float Vent Valves or OPW 233VP and 233VMP Test Plugs in OPW 233, 233V, and 233VM Extractor Fittings
2 Inch x 6 Foot CARB EVR Approved Aluminum Straight Drop Tube
Item No. 419-02061TEVR
Directs product flow to liquid level when filling a storage tank
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing
