Underground Storage Tank Equipment
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Carbon Canister Vapor Polisher
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Fuel Type
Length
Inlet
Color
Application
Pressure Differential
Voltage
- List View
- Gallery View
Page of 6 |
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
2 Inch Female NPT Replacement Shear Top For Single-Poppet 10RF-2001 Valve
Item No. 10RFT-5742
2 Inch Male NPT 10 Series Double-Poppet Emergency Shut-Off Shear Valve
Item No. 10RMP-2004
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
2 Inch Tee Double Outlet Vent Threaded Female NPT
Item No. 155-0500AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
3 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0600AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2200
Factory-adjusted hydrostatic head pressure settings
2 Inch Anti-Syphon Valve 10 To 15 Foot Head Pressure
Item No. 199ASV-3200
Factory-adjusted hydrostatic head pressure settings
2 Inch Pressure Relief Nipple Check Valve Bronze Viton Seats
Item No. 212VPR-20-3650
Mounted in fuel lines at the submersible pump to hold the prime and prevent premature tripping of mechanical leak detectors
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1-1/2 Inch Female NPT x 3 Inch Shorty Offset Adapter
Item No. 303-1530
Compensates for misalignment of dispenser suction stub and dispenser boxes.
2 Inch Tank Monitor Cap & Adapter With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XPA-2200AK
Combination cap and Adapter kit for leak detection systems
2 Inch Tank Monitor Cap & Adapter With 1/2 Inch Port & Cable Connector
Item No. 305XPA-2400AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks