Swivel Vapor Adapter
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Accessory
Type
Composition
Size
- List View
- Gallery View
| Page of 1 |
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector
Item No. 305XP-1200ACEVR
Used for fill ports and access to leak detection on fuel storage tanks
4 Inch Nickel Plated E85 Evr Approved Vapor Recovery Swivel Adapter
Item No. 61VSA-MA
Nickel coated brass construction for durability, consistent swivel torque, and reliable vapor tight sealing
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch EVR Bronze Vapor Swivel Adapter
Item No. 61VSA-1020-EVR
Stage I vapor Adapters are installed in spill containment manholes on the vapor recovery riser pipe from UST
4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XP-0200ACEVR
Tank monitor caps are installed on tank monitor riser pipe adapters to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Vapor Swivel Adapter
Item No. A0076-124S
The Model A0076-124S Vapor Swivel Adapter typically installs on the tank vapor riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks. The adapter is designed for use with Top-Seal vapor caps.
![Fill Cap 4 Inch For Tank Probe [Evr]](https://shop.sourcena.com/lowres/detail/A0097-010.jpg "Fill Cap 4 Inch For Tank Probe [Evr]")
Fill Cap 4 Inch For Tank Probe [Evr]
Item No. A0097-010
Provides vapor tight integrity eliminating fugitive emissions
