Aboveground Storage Tank Equipment
Monitoring Systems

Advanced Tank Gauging Systems Designed For Dependability and Remote Monitoring

Source North America Corporation's tank gauging systems provide the accurate, user-friendly inventory and compliance management tools that today's retail and commercial fuel site operators need to remain both compliant and profitable.

With product solutions from some of the most respected petroleum equipment manufacturers in the industry, our tank gauging systems and accessories are designed to streamline wetstock management. Offering monitoring systems, accessories and replacement parts for ethanol and diesel applications, Source delivers the monitoring equipment fuel marketers need to minimize downtime resulting from leaks and other inventory complications. From industry-leading tank-monitoring consoles that can be managed remotely and probe float kits capable of detecting phase separation, our tank gauging equipment will help ensure that your products are secure and that your site is meeting critical environmental compliance regulations in an efficient manner.

  • List View
  • Gallery View
Sort By:
Results/Page:
Page
of 4
     
Quick Info
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)

4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)

Tight fill top seal cap is installed on top seal Adapters

Quick Info
4 Inch Probe Cap With 3/8 Inch Grommet

4 Inch Probe Cap With 3/8 Inch Grommet

Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe

Quick Info
Quick Info
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved

4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved

Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required

Quick Info
4 Inch Brass Top Seal Tight Fill Adapter With Lugs

4 Inch Brass Top Seal Tight Fill Adapter With Lugs

EVR Approved used for fill ports and access to leak detection on fuel storage tanks

Quick Info
Quick Info
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 inch threaded port hole 3/8 inch, 2 pound

Quick Info
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector

4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector

Used for fill ports and access to leak detection on fuel storage tanks

Quick Info
Replacement 4 Inch Gasket For 305C Series Cap

Replacement 4 Inch Gasket For 305C Series Cap

Used to replace missing or damaged gaskets on the 305c series caps

Quick Info
Quick Info
Quick Info
Quick Info
4 Inch Standard Mag Probe Water Float Kit For Diesel

4 Inch Standard Mag Probe Water Float Kit For Diesel

Use with standard mag probe

Quick Info
4 Inch Updraft Vent

4 Inch Updraft Vent

Open vent design used on under ground and above ground tanks

Quick Info
Quick Info
4 Inch NPT Male x 4 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 4 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch Side Seal Cap

4 Inch Side Seal Cap

Used for fill ports and access to leak detection on fuel storage tanks

Quick Info
Quick Info
4 Inch NPT Male x 5 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 5 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch NPT Male x 6 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 6 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch NPT Male x 7 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 7 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch NPT Male x 9  Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 9 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch NPT Male x 10 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 10 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Quick Info
4 Inch NPT Male x 11 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

4 Inch NPT Male x 11 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple

0.188 wall thickness to accommodate submersible pump installation.

Displaying: 1 - 24 of 94 results
 
 
 
Go Top