Aboveground Storage Tank Equipment
Monitoring Systems

Advanced Tank Gauging Systems Designed For Dependability and Remote Monitoring

Source North America Corporation's tank gauging systems provide the accurate, user-friendly inventory and compliance management tools that today's retail and commercial fuel site operators need to remain both compliant and profitable.

With product solutions from some of the most respected petroleum equipment manufacturers in the industry, our tank gauging systems and accessories are designed to streamline wetstock management. Offering monitoring systems, accessories and replacement parts for ethanol and diesel applications, Source delivers the monitoring equipment fuel marketers need to minimize downtime resulting from leaks and other inventory complications. From industry-leading tank-monitoring consoles that can be managed remotely and probe float kits capable of detecting phase separation, our tank gauging equipment will help ensure that your products are secure and that your site is meeting critical environmental compliance regulations in an efficient manner.

  • List View
  • Gallery View
Sort By:
Results/Page:
Page
of 2
     
Quick Info
1-1/2 Inch Threaded Double Outlet Vent Female NPT

1-1/2 Inch Threaded Double Outlet Vent Female NPT

Aluminum t-style vent used primarily on small fuel oil storage tanks

Quick Info
1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure

1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure

Factory-adjusted hydrostatic head pressure settings

Quick Info
1 1/2 Inch Buna Union Check Valve With Screen

1 1/2 Inch Buna Union Check Valve With Screen

Easily inserted onto existing union fittings in suction systems

Quick Info
1-1/2 Inch Full Port Two-Way Ball Valve

1-1/2 Inch Full Port Two-Way Ball Valve

Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system

Quick Info
1-1/2 Inch Open Vent Upward Aluminum

1-1/2 Inch Open Vent Upward Aluminum

Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent

Quick Info
1-1/2 Inch Swing Check Valve - Threaded Brass

1-1/2 Inch Swing Check Valve - Threaded Brass

Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction

Quick Info
Quick Info
1-1/2 Inch Single Poppet Foot Valve

1-1/2 Inch Single Poppet Foot Valve

Installed at the inlet of a suction line bottom of the storage tank

Quick Info
1-1/2 Inch Double Poppet Foot Valve

1-1/2 Inch Double Poppet Foot Valve

Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.

Quick Info
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve

1-1/2 Inch Full Port Stainless Steel Locking Ball Valve

Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion

Quick Info
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)

1-1/2 Inch Vertical Check Valve With Shear Groove (E85)

OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime

Quick Info
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)

1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)

OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime

Quick Info
1-1/2 Inch Solenoid Valve Viton Seal 120 Volt

1-1/2 Inch Solenoid Valve Viton Seal 120 Volt

Installed on piping leading from an aboveground tank to prevent accidental siphoning

Quick Info
1-1/2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil

1-1/2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil

Installed on piping leading from an aboveground tank to prevent accidental siphoning

Quick Info
1-1/2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief  5-10 Foot W.C.

1-1/2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 5-10 Foot W.C.

Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.

Quick Info
Quick Info
1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.

Quick Info
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x  1-1/2 Inch Male Swivel Stainless Steel Ends

1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 1-1/2 Inch Male Swivel Stainless Steel Ends

Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.

Quick Info
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 1-1/2 Inch Male Swivel Stainless Steel Ends

1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 1-1/2 Inch Hex Male x 1-1/2 Inch Male Swivel Stainless Steel Ends

Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.

Quick Info
1-1/2 Inch x 12 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

1-1/2 Inch x 12 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.

Quick Info
1-1/2 Inch x 15 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

1-1/2 Inch x 15 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends

Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.

Quick Info
1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch Nickel-Plated Steel Hex Male x 2 Inch Stainless Steel EZ-FIT 90 Degree Female Glue Pipe Ends

1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch Nickel-Plated Steel Hex Male x 2 Inch Stainless Steel EZ-FIT 90 Degree Female Glue Pipe Ends

Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.

Quick Info
Quick Info
1-1/2 Inch Anti-Syphon Valve 0 To 5 Foot Head Pressure

1-1/2 Inch Anti-Syphon Valve 0 To 5 Foot Head Pressure

Factory-adjusted hydrostatic head pressure settings

Displaying: 1 - 24 of 31 results
 
 
 
Go Top