6 Inch Female
3 Inch x 2 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Accessory
Type
Composition
Size
Length
Horse Power
- List View
- Gallery View
| Page of 2 |
8 Inch Flanged 8 Ounce/Square Inch Aluminum Emergency Vent With Cast Iron Cover And FKM Viton A O-Ring UL 2583 And ULC Listed
Item No. 244OF-0100AV
UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.
8 Inch Flanged 16 Ounce/Square Inch Aluminum Emergency Vent With Cast Iron Cover And FKM Viton A O-Ring UL 2583 And ULC Listed
Item No. 244OF-0200AV
UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.
6 Inch Monitoring Well Plug - Plastic
Item No. 678XA-0200AC
Lockable cover/ plug for monitoring wells
25 Inch Wide x 24 Inch Deep x 31 Inch Tall FlexWorks 1-Piece Polyethylene UDC Under Dispenser Containment Sump With 11 Inch x 23 Inch Frame For Gasboy Dispensers
Item No. DS-1123
The DS-1123 Polyethylene Dispenser Sump is designed to be used with these dispensers Gasboy 28-1/4 inch frame 8700, 8800, 9100, and 9800 Series with 17-1/4 inch x 28 inch footprint.
25 Inch Wide x 24 Inch Deep x 31 Inch Tall FlexWorks 1-Piece Polyethylene UDC Under Dispenser Containment Sump With 11 Inch x 23 Inch Flush-Mount Frame For Gilbarco And Wayne Dispensers
Item No. DS-1123F
The DS-1123F Polyethylene Dispenser Sump is designed to be used with these dispensers Gilbarco 27 inch frame Highline 11B Series with 15-11/16 inch x 21 inch footprint. Gilbarco 27 inch frame Trimline 251, 252, 261, 262 Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Commercial 650 Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Highline Salesmaker Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Salesmaker-4 Series with 15-11/16 inch x 27 inch footprint. Gilbarco Legacy Series with 15-11/16 inch x 27 inch footprint. Dresser Wayne 350, 357, 358, 360, 370 Series with 15 inch x 25-7/8 inch footprint.
Fiberglass Dispenser Sump 11 Inch X 23 Inch
Item No. DSF-1123
Engineered with thick side walls to withstand backfill and high water table forces
STF Series Split Test FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-STF-1C-32
The Split Test FRP Entry Fitting can be used to test secondary piping in new construction applications and to replace damaged or deteriorated rubber test fittings in repair applications. Permanently installed STF fitting leaves the secondary open, unlike other options which must be removed after testing. Features Versatile installation - STF fittings can be used in new construction and repair applications.100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPP Series Testable Pass-Thru FRP Entry Fitting For 2 Inch LCX Or 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPP-2F-U2
The Testable Pass-Thru New Construction Fitting brings both convenience and innovation for a simple and permanent installation. Dual integrated test ports eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Universal Fitting is designed to accommodate RTIIA and LCX pipe Allows all Primary and Secondary connections to be inside the sump, eliminating the need for any external pipe joints Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Dual Integrated Test Ports eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2F-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2R-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
6 Inch X 13 Foot Schedule 40 PVC UST Monitoring Well Slotted 0.020 Screen With Bottom Plug (P4060130020U)
Item No. PVCUST6
Precision machined from high quality Schedule 40 PVC pipe meeting all applicable standards.
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
6 Inch Female NPT 8 Ounce/Square Inch Aluminum Emergency Vent With Cast Iron Cover And FKM Viton B O-Ring EVR Approved UL 2583 And ULC Listed
Item No. 244O-0200AVEVR
UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
