3 Inch x 2 Inch
1/2 Pint
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Thread Sealant
Type
Composition
Size
Gallon Size
Color
Application
- List View
- Gallery View
| Page of 1 |
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
4 Inch 7-1/2 Gallon Ast Spill Container With Drain
Item No. 518-0100AC
Designed to contain small spills that occur at the fill point on aboveground storage tanks
7 Gallon 4 Inch Ast Spill Containment Manhole White
Item No. 6221-ASTW74
Heavyweight welded base design, welded-hinge with lockable lid
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
1/2 Pint Brush Gasoila Soft Set With Ptfe
Item No. SS08
Provides a positive seal on pipe threads joints fittings hoses and nozzles
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
3 Inch x 2 Inch Test Reducer With Stainless Steel Air Test Valve
Item No. PF-RA 3.6X2.4 ASS
4 Inch Female NPT 8 Ounce/Square Inch Aluminum Emergency Vent With Cast Iron Cover And FKM Viton A O-Ring UL 2583 And ULC Listed
Item No. 244O-0100AV
UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
1/2 Pint Brush-Top Gasoila E-Seal Soft-Set Thread Sealant With PTFE
Item No. GE08
Non-hardening non-toxic viscous soft-setting opaque dark green smooth paste with PTFE designed for ethanol-blended gasoline including E10 and E85.
