4 Inch
3 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Probe Float Kit
Replacement Parts & Spare Modules
Sensor
Tank Probe
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Accessory
Enviromental & Safety
Type
Composition
Tank Diameter
Tank Opening
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Inlet
Color
Application
Pressure Differential
Voltage
- List View
- Gallery View
4 Inch Diesel Float Kit
Item No. TSP-IDF4
Contains a Product and Water Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
3 Inch X 22-25 Foot Length Tapered Ends Smith Pipe (Order In Multiples Of 25 Foot)
Item No. 011030-069-2
UL971 listed and also available in 2 inch and 4 inch
4 Inch Threaded Pipe Cap Duratuff With Nitrile Seal
Item No. 116-7085
Provides access to ball float extractor fitting
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
4 Inch Duratuff Toggle-Type Side Seal Cap
Item No. 62TT-7085
Designed to mate with 61AS side seal Adapter
4 Inch X 4 Inch Fill Adapter Bronze Top Seal
Item No. 633T-8076
Threads onto the 4 inch fill pipe of underground storage tanks to mate with top-seal delivery 4 inch elbows
4 Inch Top Seal Flat Top Low Profile Cap
Item No. 731-40
Water and vapor tight can-action handle
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
5 Gallon Cast Iron Grade Level Spill Container With Drain And Black FRC Raintight Cover
Item No. 70547001BLK
Threaded Base
3 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-3203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
4 Inch Fill Cap Evr Approved
Item No. 305C-0100-ACEVR
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
4 Inch Evr Approved Vapor Recovery Cap
Item No. 323C-0100ACEVR
EVR approved all aluminum construction and orange powder coating
