3 Inch Cap 4 Inch Riser
Brass
Narrow Your Results
Mfr / Trade Name
Type
Composition
- List View
- Gallery View
| Page of 1 |
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Obsolete Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Fill Swivel Adapter
Item No. A0030-124S
The Model A0030-124S Swivel Fill Adapter typically installs on the tank fill riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks and damage to the drop tube. The adapter is designed for use with Top-Seal type fill caps.
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Vapor Swivel Adapter
Item No. A0076-124S
The Model A0076-124S Vapor Swivel Adapter typically installs on the tank vapor riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks. The adapter is designed for use with Top-Seal vapor caps.
4 Inch Top Seal Fill Pipe Adapter Without Lugs
Item No. 77830102
Top seal fill pipe Adapters are installed on the fill riser pipe in spill containment manholes on an underground storage tank and connect delivery drop elbows to the fill pipe for fuel delivery fits all top seal drop elbows and fill caps
