iX Pay SPM 2.5
3/8 Inch Port
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Maintenance
Dispenser Replacement Parts
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Type
Composition
Size
Micron Size
- List View
- Gallery View
| Page of 2 |
Line Contactor Relay Older Pre 6-1995 For 1/3 And 1/2 HP Control Box
Item No. 079-425-1
Repair part for Red Jacket "Standard" submersible turbines
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-2200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
10 Micron High Alcohol Microglass Ultimate Defense Particulate Removal Spin-On Petroleum Dispenser Filter, 1-1/2 Inch-16 Thread - 1 Inch Flow (70898)
Item No. 400HA-10
- Not for Aviation applications. UL recognized.
10 Micron Microglass Ultimate Defense Particulate Removal Spin-On Petroleum Dispenser Filter 1-1/2 Inch-16 Thread - 1 Inch Flow (70032)
Item No. 450MG-10
Removes particulate in Gasoline and Ethanol blends up to 25% Diesel ULSD and Biodiesel blends up 20% and 100% Biodiesel.
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet
Item No. 62M-0375
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
30 Micron Microglass Ultimate Defense Particulate Removal High Volume Spin-On Petroleum Dispenser Filter, 40 GPM Max Flow, 1-1/2 Inch-16 Thread (70074)
Item No. 800MG-30
- Not for Aviation applications. UL recognized.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-080
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Thornton Oil 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-156
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Chevron 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-188
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ExxonMobil 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-225
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-226
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Speedway/SuperAmerica 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-248
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Sunoco Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-289
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Fiserv Wells NA TD-351 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-463
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Heartland Small Merchant 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-468
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Valero Fiserv TD-346Â 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-480
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Marathon Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-482
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Shell Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-488
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
