Capacitor
3/8 Inch Port

  • List View
  • Gallery View
Sort By:
Results/Page:
Page
of 2
     
Quick Info
4 Inch Probe Cap With 3/8 Inch Grommet

4 Inch Probe Cap With 3/8 Inch Grommet

Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe

Quick Info
Quick Info
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 inch threaded port hole 3/8 inch, 2 pound

Quick Info
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector

2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector

Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove

Quick Info
Capacitor Assembly For 1/3 To 1-1/2 Hp 60 Hz 15 Ufd 380 Volt Single-Phase

Capacitor Assembly For 1/3 To 1-1/2 Hp 60 Hz 15 Ufd 380 Volt Single-Phase

15 MFD capacitor for FE Petro 1/3 to 1-1/2 HP 60 Hz 380 volt single-phase submersible motor

Quick Info
Capacitor Assembly For 2 Hp Fixed Speed 60 Hz 40 Ufd 370 Volt Single-Phase

Capacitor Assembly For 2 Hp Fixed Speed 60 Hz 40 Ufd 370 Volt Single-Phase

40 MFD capacitor for FE Petro 2 hp 60 Hz 370 volt single-phase fixed speed submersible motor

Quick Info
40 Mfd Capacitor For 2 Hp Single Phase Stp

40 Mfd Capacitor For 2 Hp Single Phase Stp

4 inch Red Jacket STP spare parts

Quick Info
Quick Info
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet

4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet

The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe

Quick Info
Igem 3 Product Main Display Board Cash/Credit Dual Price

Igem 3 Product Main Display Board Cash/Credit Dual Price

Main display board with (3) dual PPU displays

Quick Info
Quick Info
Quick Info
Encore 300 Main Display

Encore 300 Main Display

Core Charge Incurred At Check Out Remanufactured By Freedom Electronics

Quick Info
Encore 500 Single Ppu Display With Switch

Encore 500 Single Ppu Display With Switch

Core Charge Incurred At Check Out Remanufactured By Freedom Electronics

Quick Info
Encore 3 Product Dual Price Per Unit Circuit Board And Panel

Encore 3 Product Dual Price Per Unit Circuit Board And Panel

Core Charge Incurred At Check Out Remanufactured By Freedom Electronics

Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Quick Info
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks

Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks

The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481

Quick Info
4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector

4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector

Tank monitor caps are installed on tank monitor riser pipe adapters to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.

Quick Info
Extracta Capacitor 17-1/2 Mfd With Internal Bleed resistor (91P19186K50)

Extracta Capacitor 17-1/2 Mfd With Internal Bleed resistor (91P19186K50)

Repair part for Red Jacket "Standard" and Maxxum Big Flo submersible turbines

Displaying: 1 - 24 of 27 results
 
 
 
Go Top