Cable
3/8 Inch Port

  • List View
  • Gallery View
Sort By:
Results/Page:
Page
of 1
Quick Info
4 Inch Probe Cap With 3/8 Inch Grommet

4 Inch Probe Cap With 3/8 Inch Grommet

Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe

Quick Info
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved

Aluminum 4 inch threaded port hole 3/8 inch, 2 pound

Quick Info
4 Inch Tank Monitoring Cap/Adapter Combination With 3/8 Inch Hole

4 Inch Tank Monitoring Cap/Adapter Combination With 3/8 Inch Hole

Keeps water dirt and debris out of the tank prevents vapors from escaping

Quick Info
Quick Info
4 inch 61SOC Series Single-Point Coaxial Non-Vaportight OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank With 5 Foot Burial

4 inch 61SOC Series Single-Point Coaxial Non-Vaportight OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank With 5 Foot Burial

The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.

Quick Info
4 inch 61SOC Series Single-Point Coaxial Non-Vaportight OPV Overfill Prevention Valve For Up To 10 Foot Diameter Tank With 10 Foot Burial

4 inch 61SOC Series Single-Point Coaxial Non-Vaportight OPV Overfill Prevention Valve For Up To 10 Foot Diameter Tank With 10 Foot Burial

The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.

Quick Info
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet

4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet

The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe

Quick Info
Overfill Prevention Valve Coaxial Vapor-Tight Self-Sealing 4 Inch X 13 Foot With Cap And A0089 Adapter

Overfill Prevention Valve Coaxial Vapor-Tight Self-Sealing 4 Inch X 13 Foot With Cap And A0089 Adapter

Includes A0097-005 Tight Fill Cap And An A0089-001 Tight Fill Adapter

Quick Info
Overfill Prevention Valve Coaxial Vapor-Tight Self-Sealing 4 Inch X 15 Foot With Cap & A0089 Adapter

Overfill Prevention Valve Coaxial Vapor-Tight Self-Sealing 4 Inch X 15 Foot With Cap & A0089 Adapter

Includes A0097-005 Tight Fill Cap And An A0089-001 Tight Fill Adapter

Quick Info
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)

2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)

Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)

Quick Info
Quick Info
Quick Info
Quick Info
4 Inch Evr Approved Tank Monitor Cap/Adapter With 3/8 Inch Port & Cable Connector

4 Inch Evr Approved Tank Monitor Cap/Adapter With 3/8 Inch Port & Cable Connector

Keeps water dirt and debris out of the tank prevents vapors from escaping

Quick Info
Quick Info
2 hp AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump Non-MagShell With Model R Check Valve Without Riser (ISTR2-00)

2 hp AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump Non-MagShell With Model R Check Valve Without Riser (ISTR2-00)

Variable speed variable length (90 - 151 inches) with non-MagShell motor. Includes model R check valve (24 psi relief / 22 psi reset for PLLD)

Quick Info
Displaying: 1 - 17 of 17 results
 
 
 
Go Top