3/4 Inch
Piping
Narrow Your Results
Mfr / Trade Name
Category - Main
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Accessory
Type
Composition
Size
Length
- List View
- Gallery View
| Page of 2 |
3/4 Inch x 250 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed
Item No. C075A-250
3/4 Inch I.D. x 1.18 Inch O.D. next-generation FlexWorks pipe features increased flexibility reduced memory and reduced weight for ease of installation.
3/4 Inch x 500 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed
Item No. C075A-CL500
3/4 Inch I.D. x 1.18 Inch O.D. next-generation FlexWorks pipe features increased flexibility reduced memory and reduced weight for ease of installation.
FF Series Double-Sided FRP Flange Pass-Through Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Singlewall FRP Sump - (1) EP100 Required
Item No. F-07-F
- UL2447 listed. 30-year corrosion warranty.
Flexible Entry Boot For 3/4 Inch Electrical Conduit
Item No. FEB-050-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-FRP-1F-C8
The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-1F-C8
The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
SRB Series Oversize Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-SRB-2F-C8
The Oversized Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Oversized model eliminates need to pair the SRB with a BSO fitting. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
STF Series Split Test FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-STF-1C-32
The Split Test FRP Entry Fitting can be used to test secondary piping in new construction applications and to replace damaged or deteriorated rubber test fittings in repair applications. Permanently installed STF fitting leaves the secondary open, unlike other options which must be removed after testing. Features Versatile installation - STF fittings can be used in new construction and repair applications.100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPP Series Testable Pass-Thru FRP Entry Fitting For 2 Inch LCX Or 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPP-2F-U2
The Testable Pass-Thru New Construction Fitting brings both convenience and innovation for a simple and permanent installation. Dual integrated test ports eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Universal Fitting is designed to accommodate RTIIA and LCX pipe Allows all Primary and Secondary connections to be inside the sump, eliminating the need for any external pipe joints Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Dual Integrated Test Ports eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2F-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2R-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
3/4 Inch NPT Female x 3/4 Inch NPT Male Swivel Conversion Adapter
Item No. ACSWA0075
Swivel adapter converts the integral hex male to a swivel end.
FF Series Double-Sided FRP Flange Pass-Through Entry Fitting For 3/4 Inch Robroy PVC-Coated Conduit On Flat-Wall Singlewall FRP Sump - (1) EP100 Required
Item No. F-07R-F
- UL2447 listed. 30-year corrosion warranty.
Retrofit-S Series Single-Sided FRP Split Retrofit Fitting With 5 inch Flange For 3/4 Inch Conduit On Flat Or Round-Wall Singlewall FRP Sump - (1) EP100RF Required
Item No. RF-07-01-U
Used for internal one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in singlewall sumps.
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
3/4 Inch x 12 Inch FireShield Stainless Steel Flex Connector With 3/4 Inch Hex Male x 3/4 Inch Hex Male Stainless Steel Ends
Item No. FSMM120075
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
