1/4 Inch
1-3/4 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Air Machines
Type
Composition
Size
Length
- List View
- Gallery View
| Page of 2 |
4 Inch X 2-1/2 Inch Tall Riser Pipe Extension Short
Item No. 1002S-40
For use on all Adapters
Riser Extension 4 Inch NPT X 4 Inch Diameter X 2-1/2 Inch Installed Height
Item No. A0031-250
Obsolete Designed to compensate for height variances due to tank settling and heaving
1-3/4 Inch Ducted Entry Boot For Xp-175-Sc
Item No. DEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Flexible Entry Boot For Xp-175-Sc & 2 Inch Single Wall Fiberglass
Item No. FEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Xp Brass Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200
Manufactured from solid brass with two Viton O-rings protected in grooves located on the inside of the connector. E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85) diesel and biodiesel.
1-3/4 Inch XP Stainless Steel Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200SS
E-coated clamps provide durablilty and corrosion resitance from gas/alcohol blends (including E85) diesel and biodiesel.
STF Series Split Test FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-STF-1C-32
The Split Test FRP Entry Fitting can be used to test secondary piping in new construction applications and to replace damaged or deteriorated rubber test fittings in repair applications. Permanently installed STF fitting leaves the secondary open, unlike other options which must be removed after testing. Features Versatile installation - STF fittings can be used in new construction and repair applications.100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPP Series Testable Pass-Thru FRP Entry Fitting For 2 Inch LCX Or 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPP-2F-U2
The Testable Pass-Thru New Construction Fitting brings both convenience and innovation for a simple and permanent installation. Dual integrated test ports eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Universal Fitting is designed to accommodate RTIIA and LCX pipe Allows all Primary and Secondary connections to be inside the sump, eliminating the need for any external pipe joints Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Dual Integrated Test Ports eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2F-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2R-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
1-3/4 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-175-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
Filler Faucet Rubber Spout Female 1/4 Inch NPT Thread
Item No. 209
Filler faucet female 1/4 inch NPT threads
3 Inch X 3 Inch Poppeted Vapor Recovery Adapter (3 Inch Riser)
Item No. 1611AV-1605
Designed to mate with a delivery tank truck vapor recovery elbow
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
1/4 Inch x 25 Foot Red Ultra Lightweight 300 PSI Rubber Air Hose With 1/4 Inch Male x 1/4 Inch Male Brass Ends
Item No. ULR142514
Strong rubber material allows for optimal performance in temperatures ranging from -50 Degree F to 190 Degree F, with a Maximum Operating Pressure 1,200 PSI and a Max Working Pressure of 300 PSI.
Secondary Test Boot For Xp-175-Sc Pipe
Item No. STB-175
Boots are made using fuel-resistant nitrile rubber
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
