1-3/4 Inch
Franklin Electric
Narrow Your Results
Mfr / Trade Name
Category - Main
Probe Float Kit
Sensor
Tank Probe
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Flexible Piping
Accessory
Type
Composition
Size
Tank Diameter
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Application
- List View
- Gallery View
| Page of 3 |
Defender Series CARB Approved AGB Compatible Poppeted Coaxial Overfill Prevention Valve With 6-1/2 Foot Top Drop Tube And 10 Foot Bottom Drop Tube
Item No. 708693924
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
Flexible Ducting Connector With Clamps
Item No. DCT-400-F
Works on OPW AXP40 and Franklin DCT-400 Ducting
1-3/4 Inch Ducted Entry Boot For Xp-175-Sc
Item No. DEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Flexible Entry Boot For Xp-175-Sc & 2 Inch Single Wall Fiberglass
Item No. FEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
Flexible Entry Boot For R-400-D & 4 Inch Single Wall Fiberglass
Item No. FEB-400-R
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Xp Brass Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200
Manufactured from solid brass with two Viton O-rings protected in grooves located on the inside of the connector. E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85) diesel and biodiesel.
1-3/4 Inch XP Stainless Steel Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200SS
E-coated clamps provide durablilty and corrosion resitance from gas/alcohol blends (including E85) diesel and biodiesel.
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Diesel Float Kit
Item No. TSP-IDF4
Contains a Product and Water Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
1-3/4 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-175-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
5 Gallon Cast Iron Grade Level Spill Container With Drain And Black FRC Raintight Cover
Item No. 70547001BLK
Threaded Base
2 HP Variable Speed 90 Inch-151 Inch Variable Length Submersible Turbine Pump Non-Magshell Without Riser (STPVS2-VL2-00)
Item No. 400834901
Variable length adjusts from 90 inches to 151 inches
